Influence of abutment shape on peri-implant tissue conditions: A randomized clinical trial.

OBJECTIVE: To analyze the influence of 3-mm high abutments with different shapes (cylindrical abutment vs. wide abutment) on marginal bone-level changes (bone loss and bone remodeling). The influence of abutment shape on implant success, probing pocket depth (PPD), and bleeding on probing (BoP) was studied as secondary objectives. MATERIALS AND METHODS: Patients with a partially edentulous area requiring fixed dental prostheses by two implants in the posterior mandible or maxilla were included. The implants were 1 mm subcrestally placed, and osseointegration healing was submerged. Three-mm high abutments with two different shapes were randomly placed in second-stage surgery: cylindrical abutments (cylindrical group) and wide abutments (wide group). Marginal bone-level changes were measured using parallelized periapical radiographs at abutment placement, at definitive prosthesis placement, and at 1, 3, 6, and 12 months after loading. PPD and BoP were likewise measured at the control visits. RESULTS: Sixty-four dental implants in 25 patients were included. Statistically significant differences were found in bone-level changes. The cylindrical group exhibited less mean marginal bone remodeling (MBR) and marginal bone loss (MBL) than the wide group (p < .05). Moreover, the cylindrical group showed significantly less BoP (p < .05). CONCLUSION: Abutment shape had a significant influence upon marginal bone-level changes during the first 12 months. Cylindrical abutments caused less MBR and MBL than wide abutments. More clinical studies involving longer follow-ups and analyzing other abutment modifications are needed to improve our understanding of how abutments can affect peri-implant tissue stability.

Influence of the use of autogenous bone particles to close the access window after maxillary sinus floor augmentation: a micro-computed tomography and positron emission tomography study in rabbits.

AIM: The purpose of this study was to evaluate using microCT and positron emission tomography (PET) analysis, the influence on bone healing of the placement of particulate autogenous bone in the antrostomy, and in the subjacent region after maxillary sinus elevation with xenograft. MATERIAL AND METHODS: The sinus mucosa was elevated in sixteen male New Zealand rabbits and they were both grafted with a collagenated cortico-cancellous porcine bone. The antrostomy and the near subjacent region were filled with either the same xenograft (control site) or with particulate autogenous bone (test site) harvested from the tibia. The antrostomies were covered with collagen membranes. MicroCT (measured in Hounsfield Units) and microPET (kBq/cm3) using sodium fluoride infiltration (18F-NaF) were performed at the time of euthanasia that was performed after 1 and 8 weeks of healing, using 8 animals in each group. The Wilcoxon test was used for analysis. RESULTS: At the microCT analysis, after 1 and 8 weeks of healing, no statistically significant differences were found between groups. Bone increased and xenograft decreased significantly between the two periods of healing. At the microPET analysis, the percentage of bone increased significantly over time in both test and control groups and no significant differences were found between groups. CONCLUSION: The placement of autogenous bone in the antrostomy and the subjacent region after maxillary sinus elevation did not enhance bone formation compared with sites where only xenograft was used. Both microCT and microPET showed increase bone formation over time.

Influence of the Use of a Collagen Membrane Placed on the Bone Window after Sinus Floor Augmentation-An Experimental Study in Rabbits.

BACKGROUND: We studied the influence on healing of a resorbable membrane covering the osteotomy site after maxillary sinus grafting, evaluated in different regions of the augmented area. METHODS: Maxillary sinus augmentation was performed in 24 New Zealand rabbits. Osteotomy, 4 × 6 mm, were performed bilaterally. A collagenated cortico-cancellous porcine bone was used to fill the elevated region. A collagen membrane was randomly placed over the osteotomy site on one side (MG), and the other side was left uncovered (NMG). The animals were euthanized after 2, 4, and 8 weeks; and histomorphometric analysis was performed in eight different regions. RESULTS: New bone percentages were similar in both groups. There were no statistically significant differences. In MG, the overall percentages were 15.6 ± 7.3%, 22.9 ± 6.1%, and 24.9 ± 12.0% after 2, 4, and 8 weeks, respectively. In NMG, the percentages were 11.2 ± 4.5%, 24.1 ± 5.7%, and 24.5 ± 15.7%, respectively. The proportions of new bone in the various regions after 8 weeks were 31 ± 8.9% and 29.9 ± 9.1% in the bone walls region, 25 ± 10.1% and 32.8 ± 9.1% in the submucosa region, 22.6 ± 21.6% and 10.9 ± 11.5 in the middle region, 17.3 ± 14% and 13.4 ± 9.8% in the close-to-window region, and 21.8 ± 11.6%, 19.1 ± 6.4% in the osteotomy region-for MG and NMG, respectively. CONCLUSIONS: In both groups the greatest amounts of bone formation occurred near to the pre-existing bone walls, followed by the sub-mucosa region. The smallest amounts were found in the close-to-window region, followed by the central region. The placement of a collagen membrane to cover the osteotomy site did not influence the amount of new bone formation after sinus grafting.

Facial alveolar bone thickness and modifying factors of anterior maxillary teeth: a systematic review and meta-analysis of cone-beam computed tomography studies.

BACKGROUND: Understanding the anatomy of the facial alveolar bone (FAB), provides a prognostic tool for estimating the degree of dimensional ridge alterations after tooth extraction. This systematic review and meta-analysis aims to determine the FAB thickness and modifying factors of anterior maxillary teeth measured by CBCT scans. A secondary objective was to assess the facial distance from the cementoenamel junction (CEJ) to the bone crest. METHODS: An electronic search was made of Medline, Embase, Web of Science, Cochrane Library and Google Scholar up to December 2019. Studies that analyze and quantitatively compare FAB thickness at maxillary teeth by CBCT scans were included. The methodological quality of the included studies was appraised using the ROBINS-I tool and the overall meta-evidence certainty using the GRADE approach. A single means random-effects meta-analysis was performed to obtain the weighted mean for 95% confidence interval. A meta-regression of covariates and subgroup analysis was conducted. The nullity Qh test and I2 index for heterogeneity was estimated. RESULTS: 2560 potentially relevant articles were recorded from which 29 studies were selected for the qualitative analysis, including 17,321 teeth. Seventeen studies considered the facial bone crest, and 12 the CEJ as a reference point for their measurements. Mean FAB thickness was ≤ 1 mm in maxillary incisors and canines (0.75-1.05 mm) and 1-2 mm in premolars. Patients over 50 years of age, females and thin gingival phenotype was associated with thinner FAB at some apico-coronal locations of maxillary incisors and canines. The geographical setting was an effect modifier that could explain up to 87% of the heterogeneity in FAB thickness, being Asian populations that showed the lowest FAB thickness values. The CEJ-bone crest distance was 2-2.5 mm in all teeth analyzed. Population over 50 years of age exhibited greater CEJ-bone crest distances, and males also showed a trend for greater distance. Evidence certainty has shown moderate quality in most analysis subsets. CONCLUSIONS: Facial alveolar bone at anterior maxillary teeth is thin, heterogeneous in width along its apico-coronal dimensions, and increases in thickness in maxillary premolars. The CEJ-bone crest distance presented homogeneous and similar values in all teeth analyzed.

Influence of occlusal loading on peri-implant inflammatory cytokines in crevicular fluid: a prospective longitudinal study.

OBJECTIVE: The objective of the study was to evaluate the relation between occlusal loading and peri-implant crevicular fluid cytokine expression in patients with implant-supported complete fixed prostheses in both arches. MATERIAL AND METHODS: A prospective longitudinal clinical study was performed at a university clinic. Fifteen patients were selected and 11 were included. All patients had bimaxillary implant-supported complete fixed ceramo-metallic prostheses loaded at least 12 months before the beginning of the study. Allocation was established for each patient using a computerized occlusal analysis system. The test implant was the maxillary implant closest to the point of highest occlusal loading. The maxillary implant with least loading was the control implant. Occlusal adjustment was performed using a round diamond burr. This occlusal distribution was verified with the occlusal analysis system. Expression of cytokines from peri-implant crevicular fluid (TNF-α, IL-10, IL-6, IL-1ß, IL-8) were recorded and analyzed in both test and control implants before (baseline: T0) and 2 (T1) and 12 months (T2) after occlusal adjustment. The Brunner-Langer non-parametric test was performed. RESULTS: At T0, the expression of IL-10 was significantly higher in the test group implants (p = 0.018). Between T0 and T1, the expression of all the cytokines decreased in the implants of both groups with statistically significant differences, except for TNF (p = 0.271). When comparing both groups at T1, there was no statistically significant difference in any of the analyzed cytokines. At T2, TNF-α suffered when compared with baseline, a statistical decrease in both study and control implants (p < 0,001). At T2, there were no statistically significant differences between groups in any of the cytokines analyzed. CONCLUSIONS: Implants with higher occlusal load presented higher expression of IL-10 in peri-implant crevicular fluid. Occlusal adjustment produced a decrease in the expression of all the analyzed cytokines, both in test and control implants.

Radiological implications of crestal and subcrestal implant placement in posterior areas. A cone-beam computed tomography study.

BACKGROUND: Subcrestal implant placement has been suggested as a method that could contribute to maintain the periimplant soft and hard tissues in comparison with crestal placement. The objective of this study was to investigate the relationship between implant placement at different depths in the alveolar bone and (a) the thickness of the buccal bone plate (BBP); and (b) crestal cortical bone thickness, based on the use of cone-beam computed tomography (CBCT). MATERIAL AND METHODS: A cross-sectional study was performed, analyzing CBCT scans from the database of the Oral Surgery Unit of the University of Valencia. Individuals with single missing teeth in posterior sectors were included. Two trained dentists used a software application to plan implant placement at four different depths from the bone crest (from 0-2 mm subcrestal). The thickness of the BBP was measured at each established depth, tracing a line from the implant platform to the outermost part of the facial alveolar bone, and the ratio between the implant platform and cortical bone thickness was calculated. RESULTS: The study sample consisted of 64 patients. In the case of implants placed in a crestal position, the distance from the platform to the BBP was 1.99±1.10 mm. This distance increased significantly (p<0.001) with the planned implant placement depth, reaching an average of 2.90±1.22 mm when placement was 2 mm subcrestal. Subcrestal implant placement at this depth implied surpassing the cortical bone in 91% of the cases. CONCLUSIONS: Radiological planning of implant placement in a subcrestal position results in a greater distance from the implant platform to the BBP. In general terms, planning implant placement at a depth of 2 mm subcrestal surpassed the cortical bone in 91% of the cases. Key words:Subcrestal implant, cortical bone thickness, buccal bone plate, cone-beam computed tomography.

Sequential healing of the elevated sinus floor with different size of antrostomy: a histomorphometric study in rabbits.

PURPOSE: To study the influence of the access window dimensions on the healing at the antrostomy and within the augmented maxillary sinus. MATERIAL AND METHODS: A maxillary sinus augmentation was performed in twenty-four albino New Zealand rabbits. Antrostomies of 3 × 6 mm (small) or 5 × 6 mm (large) in dimensions were randomly prepared in each animal. A collagenated cortico-cancellous porcine bone was used to fill the elevated region, and an equine collagen membrane was placed on the antrostomies. Three different groups were formed, based on the time of euthanasia, i.e., 2, 4, and 8 weeks from surgery. RESULTS: No relevant changes of the height of the augmented sinus were detected over time. Mineralized bone increased between 2 and 4 weeks of healing while remained stable between 4 and 8 weeks. The highest amounts of new bone were found close to the sinus bone walls. No antrostomies were found healed with an even layer of corticalized bone, while large amounts of connective tissue were occupying the antrostomy in both groups. CONCLUSION: Antrostomies of different dimensions resulted in similar outcome in bone formation both in the antrostomy regions and within the elevated sinus.

Influence of the use of autogenous bone particles to close the access window after maxillary sinus floor augmentation: an experimental study in rabbits.

AIM: To study the influence on the healing of the placement of particulate autogenous bone in the antrostomy and in the subjacent region after maxillary sinus elevation. MATERIAL AND METHODS: Sixteen New Zealand rabbits were undergone to bilateral maxillary sinus floor augmentation with 4 × 4 mm antrostomy dimension. The sinus mucosa was elevated, and the space obtained was filled with xenograft. In the test site (treated sites), autogenous bone was harvested from the tibia and was placed either in the antrostomy and the subjacent region while the control site was left untreated. Antrostomy was covered bilaterally with collagen membranes. Animals were euthanized after 1 and 8 weeks of healing, with 8 rabbits in each group. Histomorphometric evaluations were done. The Wilcoxon test is used for statistical analysis, for a 5% statistical significance. RESULTS: After 1 week of healing, the new bone proportion in the antrostomy was 7.7 ± 11.2% and 6.1 ± 6.4% in the treated and untreated sites, respectively. In the subjacent region (close-to-window region), hardly any new bone was assessed. In the elevated region, 2.7-2.8% of total new bone was found in both sites. In the antrostomy region, after 8 weeks of healing, 35.5 ± 20.9% of new bone in the treated sites, and 28.6 ± 24.1% in the untreated sites was observed (p = 0.499). In the close-to-window region, the respective proportions were 25.8 ± 16.1% and 17.6 ± 16.3% (p = 0.018). In the elevated region, the total new bone reached fractions of 27.9 ± 12.9% and 23.6 ± 15.2% in the treated and untreated sites, respectively (p = 0.128). CONCLUSIONS: The placement of autogenous bone in the antrostomy and the subjacent region after maxillary sinus elevation, slightly enhanced bone formation compared with sites only grafted with xenograft. Though, only the subjacent close-to-window region showed a statistical significance at 8 weeks of healing. Despite the limitations of the present study, due to its preclinical nature, findings should be extrapolated to humans with caution.

Effect on osseointegration of two implant macro-designs: A histomorphometric analysis of bicortically installed implants in different topographic sites of rabbit's tibiae

Background: To evaluate the effect of two different implant macro-designs on the sequential osseointegration at bicortically installed implants in the rabbit tibia. A further aim is to compare the osseointegration at different topographic zones. Material and Methods: 27 New Zealand rabbits were implemented. Two implants, one for each macro-design (Ticare Inhex(R) or Ticare Quattro(R), Mozo-Grau, Valladolid, Spain), were randomly implanted in the diaphysis or metaphysis of each tibia. The flaps were sutured to allow a submerged healing. The animals were sacrificed after 2, 4 or 8 weeks. Ground sections were prepared and analyzed. Results: No statistically significant differences were found between the two groups for newly formed bone in contact with the implant surface, being about 16%, 19% and 33% in both groups, after 2, 4, and 8 weeks of healing. Bone apposition was slightly higher in the diaphysis, reaching values of 36.4% in the diaphysis, and 29.3% in the metaphysis at 8 weeks of healing. It was observed that the implant position showed a statistical significance regarding BIC values at 4 and 8 weeks (p < 0.05). Multivariate analysis fails to detect statistical significant differences for the interaction between implant designs and topographic site. Ticare Quattro(R) design had a slight better BIC values at diaphysis sites across healing stages, but without reaching a statistical significance. Conclusions: The both implant macro-designs provided similar degrees of osseointegration. Bone morphometry and density may affect bone apposition onto the implant surface. The apposition rates were slightly better in diaphysis compared to metaphysis

No disponible

Relation between the distance from the cementoenamel junction to the bone crest and the thickness of the facial bone in anterior maxillary teeth: A cross-sectional tomographic study

Background: The purpose of this cross-sectional study was to evaluate radiologically, the relation between the distance from the cement enamel junction (CEJ) to the facial bone crest (FBC), and the facial alveolar bone (FAB) width at maxillary anterior teeth. A further aim was to assess if the CEJ-FBC distance had an impact in the prevalence to find a FAB thickness greater than one mm. Study design: CBCT images were retrospectively obtained from the database of the Oral Surgery Unit of the University of Valencia. The teeth were divided in 3 groups according to the CEJ-FBC distance: Shorter (≤ 3mm), Middle (>3 ≤ 4.5 mm) and Larger (> 4.5 mm). FAB thickness was measured by two different examiners at 1, 2 and 3 mm apical to the FBC. Normality of means were evaluated by Kolmogorov-Smirnov test and an ANOVA-type linear model was performed. Results: 82 patients were included in the study, with 156 central incisors, 149 lateral incisors and 152 canines analyzed. A significant greater FAB thickness in Shorter (≤ 3 mm CEJ-FBC) than Middle and Larger group was observed in all distances measured apical to the FBC. There was a significant inverse relation between the distance CEJ-FBC and FAB thickness at all distances measured. The prevalence of a FAB thickness equal or greater than one mm was 35.9% of all teeth analyzed from Shorter, 17.4% of Middle and 8.9% of Larger group at 1 mm apical to the FBC

No disponible

Relevance of Oxygen Concentration in Stem Cell Culture for Regenerative Medicine.

The key hallmark of stem cells is their ability to self-renew while keeping a differentiation potential. Intrinsic and extrinsic cell factors may contribute to a decline in these stem cell properties, and this is of the most importance when culturing them. One of these factors is oxygen concentration, which has been closely linked to the maintenance of stemness. The widely used environmental 21% O2 concentration represents a hyperoxic non-physiological condition, which can impair stem cell behaviour by many mechanisms. The goal of this review is to understand these mechanisms underlying the oxygen signalling pathways and their negatively-associated consequences. This may provide a rationale for culturing stem cells under physiological oxygen concentration for stem cell therapy success, in the field of tissue engineering and regenerative medicine.

Bone-Healing Pattern on the Surface of Titanium Implants at Cortical and Marrow Compartments in Two Topographic Sites: an Experimental Study in Rabbits.

This study evaluates the bone-healing patterns on the surface of titanium implants at the cortical and marrow compartments of bicortically-installed implants in the diaphysis and metaphysis of rabbit tibiae. In 27 New Zealand rabbits, two implants, one for each macro-design and with equal resorbable blasted media (RBM) implant surfaces, were randomly implanted in the diaphysis or metaphysis of each tibia. The flaps were sutured to allow submerged healing. The animals were sacrificed after two, four, or eight weeks, with nine weeks used for the period of healing. Ground sections were prepared and analyzed. No statistically significant differences were found between the two groups for newly formed bone in contact with the implant surface after two, four, and eight weeks of healing. Bone apposition in the marrow compartment was slightly higher in the diaphysis compared to metaphysis regions across healing stages. Despite the limitations of the present study, it can be concluded that new bone apposition was better than average in the cortical compartment as compared to the marrow compartments. Bone morphometry and density may affect bone apposition onto the implant surface. The apposition rates were slightly better at both the cortical and marrow compartments in diaphysis as compared to metaphysis sites. The new bone formation at the marrow compartment showed slightly better increasing values at diaphysis compared to metaphysis implantation sites.

Effect of incision design on interproximal bone loss of teeth adjacent to single implants. A randomized controlled clinical trial comparing intrasulcular vs paramarginal incision.

PURPOSE: To evaluate the effect of incision design in implant surgery on interproximal bone loss of posterior teeth adjacent to interdental single implants, comparing intrasulcular and paramarginal incision. A further aim was to assess the influence of the incision technique on peri-implant bone remodeling. MATERIALS AND METHODS: A controlled randomized clinical trial was carried out in a University Clinic. All the patients received an interdental posterior single implant. The incision type was randomly divided into two groups: (a) intrasulcular or (b) paramarginal. Standardized periapical digital radiographs were made with the parallel technique and a silicone index individualized in each patient. Radiographs were made immediately after implant placement, at abutment connection, 6 and 12 months post-loading. Two radiographic reference points were detected at the interproximal aspect of the adjacent teeth: (A) the cementoenamel junction and (B) the most coronal aspect of the bone crest. The interproximal bone loss of the adjacent teeth was calculated as the difference from A to B between the different follow-up periods and baseline. Two different examiners evaluated the radiographic measurements twice. RESULTS: Sixty patients, each with one implant, were included, 30 in each group. A mean interproximal bone loss in teeth of 0.09 mm in the intrasulcular and 0.10 mm in the paramarginal group was found at 12 months post-loading. Mean peri-implant bone remodeling was 0.17 mm in the intrasulcular group and 0.15 mm in the paramarginal group. Differences between incision types were not statistically significant (p > .05). CONCLUSIONS: Both incision designs used to place interdental single implants resulted in minimum bone loss at the interproximal aspect of adjacent teeth. The incision design did not significantly influence the radiographically assessed interproximal bone loss nor peri-implant bone remodeling.

Accuracy of Implant Placement with Computer-Guided Surgery: A Systematic Review and Meta-Analysis Comparing Cadaver, Clinical, and In Vitro Studies.

PURPOSE: The aim of this systematic review was to analyze the accuracy of implant placement using computer-guided surgery and to compare virtual treatment planning and outcome in relation to study type (in vitro, clinical, or cadaver). A further objective was to compare the accuracy of half-guided implant surgery with that of full-guided implant surgery. MATERIALS AND METHODS: A PubMed search was performed to identify studies published between January 2005 and February 2015, searching the keywords "reliability AND dental implant planning" and "accuracy dental implant planning." Inclusion criteria were established a priori. Horizontal coronal deviation, horizontal apical deviation, angular deviation, and vertical deviation were analyzed. RESULTS: A total of 186 articles were reviewed, and 34 fulfilled the inclusion criteria. Information about 3,033 implants was analyzed in 8 in vitro studies (543 implants), 4 cadaver studies (246 implants), and 22 clinical studies (2,244 implants). Significantly less horizontal apical deviation and angular deviation were observed in in vitro studies compared to clinical and cadaver studies, but there were no statistically significant differences in apical coronal deviation or vertical deviation between the groups. Compared to half-guided surgery, full-guided implant surgery showed significantly less horizontal coronal deviation for cadaver studies, significantly less horizontal apical deviation for clinical studies, and significantly less angular deviation for both clinical and cadaver studies. CONCLUSION: Implant placement accuracy was lower in clinical and cadaver studies compared with in vitro studies, especially in terms of horizontal apical deviation and angular deviation. Full-guided implant surgery achieved greater accuracy than half-guided surgery.

Influence of Partial O2 Pressure on the Adhesion, Proliferation, and Osteogenic Differentiation of Human Dental Pulp Stem Cells on ß-Tricalcium Phosphate Scaffold.

PURPOSE: To analyze, in vitro, the influence of O2 pressure on the adhesion, proliferation, and osteogenic differentiation of human dental pulp stem cells (DPSC) on ß-tricalcium phosphate (ß-TCP) scaffold. MATERIALS AND METHODS: DPSC, positive for the molecular markers CD133, Oct4, Nestin, Stro-1, and CD34, and negative for CD45, were isolated from extracted third molars. Experiments were started by seeding 200,000 cells on ß-TCP cultured under 3% or 21% O2 pressure. No osteogenic medium was used. Eight different cultures were performed at each time point under each O2 pressure condition. Cell adhesion, proliferation, and differentiation over the biomaterial were evaluated at 7, 13, 18, and 23 days of culture. Cell adhesion was determined by light microscopy, proliferation by DNA quantification, and osteogenic differentiation by alkaline phosphatase (ALP) activity analysis. RESULTS: DPSC adhered to ß-TCP with both O2 conditions. Cell proliferation was found from day 7 of culture. Higher values were recorded at 3% O2 in each time point. Statistically significant differences were recorded at 23 days of culture (P = .033). ALP activity was not detectable at 7 days. There was, however, an increase in ALP activity over time in both groups. At 13, 18, and 23 days of culture, higher ALP activity was recorded under 3% O2 pressure. Statistical differences were found at day 23 (P = .014). CONCLUSION: DPSC display capacity of adhering to ß-TCP under 3% or 21% O2 pressure conditions. Cell proliferation on ß-TCP phosphate is significantly higher at 3% than at 21% O2 pressure, the most frequently used O2 tension. ß-TCP can itself promote osteogenic differentiation of DPSC and is enhanced under 3% O2 compared with 21%.

Clinical parameters of implants placed in healed sites using flapped and flapless techniques: A systematic review

Background: Dental implant placement using flapless surgery is a minimally invasive technique that improves blood supply compared with flapped surgery. However, the flapless technique does not provide access to allow bone regeneration. Objective: The aim of this systematic review was to evaluate the clinical parameters following implant surgery in healed sites, using two procedures: flapped vs. flapless surgery. Material and Methods: A detailed electronic search was carried out in the PubMed/Medline, Embase and Cochrane Library databases. The focused question was, "How do flapped and flapless surgical techniques affect the clinical parameters of dental implants placed in healed sites?". All the studies included with a prospective controlled design were considered separately, depending on whether they had been conducted on animals or humans. The following data were recorded in all the included studies: number of implants, failures, location (maxilla, mandible), type of rehabilitation (partial or single), follow-up and flap design. The variables selected for comparison in the animal studies were the following: flap design, gingival index, mucosal height, recession and probing pocket depth. In humans studies the variables were as follows: flap design, plaque index, gingival index, recession, probing pocket depth, papilla index and keratinized gingiva. Results: Ten studies were included, six were experimental studies and four were clinical studies. Studies in animals showed better results using the flapless technique in the parameters analyzed. There is no consensus in the clinical parameters analyzed in human studies, but there is a trend to better results using flapless approach. Conclusions: The animal studies included in the present review show that implants placed in healed sites with a flapless approach have better clinical parameters than the flapped procedure in a short-term follow-up. In human studies, there is no consensus about which technique offer better results in terms of clinical parameters. Therefore, more research in humans is required in order to overcome the limitations and contrast these results (AU)

No disponible

Role of p16INK4a and BMI-1 in oxidative stress-induced premature senescence in human dental pulp stem cells.

Human dental pulp stem cells (hDPSCs) are a source for cell therapy. Before implantation, an in vitro expansion step is necessary, with the inconvenience that hDPSCs undergo senescence following a certain number of passages, loosing their stemness properties. Long-term in vitro culture of hDPSCs at 21% (ambient oxygen tension) compared with 3-6% oxygen tension (physiological oxygen tension) caused an oxidative stress-related premature senescence, as evidenced by increased ß-galactosidase activity and increased lysil oxidase expression, which is mediated by p16INK4a pathway. Furthermore, hDPSCs cultured at 21% oxygen tension underwent a downregulation of OCT4, SOX2, KLF4 and c-MYC factors, which was recued by BMI-1 silencing. Thus, p16INK4a and BMI-1 might play a role in the oxidative stress-associated premature senescence. We show that it is important for clinical applications to culture cells at physiological pO2 to retain their stemness characteristics and to delay senescence.

Facial Alveolar Bone Width at the First and Second Maxillary Premolars in Healthy Patients: A Cone Beam Computed Tomography Study.

The purpose of this study was to analyze the thickness of the facial alveolar bone at the first and second maxillary premolars and determinate the percentage of premolars that reached 2 mm in width. A retrospective study was performed, analyzing cone beam computed tomography scans from the database of the Oral Surgery Unit of the University of Valencia. Patients with periodontal disease, orthodontic treatment, absence among the first maxillary molars, premolars with endodontic treatment, or prosthetic restorations were excluded. The facial alveolar bone width was measured at 1, 2, 3, and 5 mm apical to the vestibular bone peak. A total of 44 patients were included in the study, with 72 first premolars and 72 second premolars analyzed. A descriptive analysis was performed and the normal means were assessed using the Kolmogorov-Smirnov test. The average width of the facial alveolar bone at first and second maxillary premolars was respectively: 1.41 ± 0.50 and 1.72 ± 0.56 at 1 mm, 1.68 ± 0.72 and 2.23 ± 0.66 at 2 mm, 1.71 ± 0.89 and 2.43 ± 0.82 at 3 mm, 1.44 ± 1.00 and 2.31 ± 1.06 at 5 mm from the vestibular bone peak. The facial alveolar bone width at the second maxillary premolars was greater than at the first maxillary premolars at all points measured. This information should be taken in account when planning immediate implants. Further studies are needed to analyze bone resorption at maxillary premolars to better understand facial alveolar bone width influence in implant treatment.

Soft Tissue Response in Posterior Teeth Adjacent to Interdental Single Implants: A Controlled Randomized Clinical Trial Comparing Intrasulcular vs Trapezoidal Incision.

PURPOSE: To evaluate the soft tissue response in posterior teeth adjacent to interdental single implants comparing intrasulcular and trapezoidal incision, and to study their evolution over time. MATERIALS AND METHODS: A controlled randomized clinical trial was carried out in the Oral Surgery and Implantology Unit of a University Clinic. All the included patients received an interdental single implant (Frontier 2.45, Ilerimplant; Global Medical Implants). The incision type was randomized by sealed envelopes into two groups using the SPSS statistical package (SPSS): (1) intrasulcular or (2) trapezoidal incision. Probing depth and gingival recession at the mesial and distal teeth adjacent to the implant were measured before implant placement, 1 month after surgery, the day of the abutment connection, and at 6 months and 1 year postloading. Scar formation and papilla index were measured 1 month after surgery, and at 6 months and 1 year postloading. RESULTS: Forty patients with one implant per patient were included: 20 in the intrasulcular and 20 in the trapezoidal group. No statistical differences were found between incision types in the measured parameters (probing depth, recession, and interproximal papilla). When analyzing periodontal changes of the total sample, significant differences were found between implant placement and the 1-year follow-up in recession, scar formation, and papilla index. CONCLUSION: The incision type used to place a single interdental implant did not significantly influence the periodontal parameters of the adjacent teeth. Considering the whole sample, the values between implant placement and 1 year postloading showed significant differences in recession, scar formation, and papilla index over time.